CRDS Laser-Based Analyzer
AN EXCEPTIONAL TRACE HYDROGEN CHLORIDE ANALYZER
Our TIGER OPTICS™ HALO™ 3 HCl trace level hydrogen chloride gas analyzer provides users with the unmatched accuracy, reliability, speed of response and ease of operation. Featuring our proven Cavity Ring-Down Spectroscopy-based trace gas sensor in a very compact and economic analyzer design, this versatile instrument allows users to measure HCl in most inert and passive gases with just one device. Users also enjoy freedom from requirements, such as periodic sensor maintenance, span calibrations, purifier replacement and pump rebuild. As a result, the HALO is ideally suited to many applications where HCl impurities are extremely critical, such as semiconductor utilization.
The HALO 3 HCl offers:
- Low single-digit parts per billion (ppb) detection capability
- Absolute measurement (freedom from calibration gases)
- Wide dynamic range
- Low cost of ownership and operational simplicity
- Clean technology—no external calibration gases required
Applications
DETECTION CAPABILITY
| Detection and Matrix | Range | LDL (3σ) | Precision (1σ) @ zero |
|---|---|---|---|
| HCl in N2 | 0 – 20 ppm | 1.0 ppb | 0.4 ppb |
| HCl in Clean Dry Air (CDA) | 0 – 20 ppm | 1.0 ppb | 0.4 ppb |
| HCl in H2 | 0 – 10 ppm | 1.0 ppb | 0.4 ppb |
SPECIFICATIONS
| Performance | |
|---|---|
| Operating range | See Detection Capability table |
| Detection limit (LDL, 3σ/24h) | See Detection Capability table |
| Precision (1σ, greater of) | ± 0.75% or 1/3 of LDL |
| Accuracy (greater of) | ± 4% or LDL |
| Speed of response | < 1 minute to 90% |
| Environmental conditions | 10°C to 40°C, 30% to 80% RH (non-condensing) |
| Storage temperature | -10°C to 50°C |
| Gas Handling System and Conditions | |
| Wetted materials | 316L stainless steel (optional corrosion-resistant material), 10 Ra surface finish |
| Gas connections | 1/4” male VCR inlet and outlet |
| Leak tested to | 1 x 10-9 mbar l / sec |
| Inlet pressure | 10 − 125 psig (1.7 − 9.6 bara) |
| Flow rate | Up to 1.8 slpm |
| Sample gases | Most inert, toxic, passive and corrosive matrices |
| Gas temperature | Up to 60°C |
| Dimensions, H x W x D | |
| Standard sensor | 8.73″ x 8.57″ x 23.6″ (222 mm x 218 mm x 599 mm) |
| Sensor rack (fits up to two sensors) | 8.73″ x 19.0″ x 23.6″ (222 mm x 483 mm x 599 mm) |
| Weight | |
| Standard sensor | 28 lbs (12.7 kg) |
| Electrical and Interfaces | |
| Platform | Max series analyzer |
| Alarm indicators | 2 user programmable, 1 system fault, Form C relays |
| Power requirements | 90 − 240 VAC, 50/60 Hz |
| Power consumption | 40 Watts max. |
| Signal output | Isolated 4−20 mA per sensor |
| User interfaces | 5.7” LCD touchscreen, 10/100 Base-T Ethernet |
| UBS, RS-232, RS-485, Modbus TCP (optional) | |
| Data storage | Internal or external flash drive |
| Certification | CE Mark |
| Patents | |
| U.S. Patent #7,277,177 | |
Serani™ Analyzer Interface Software offers users a new way to access their analyzer remotely from any computer or laptop. Compatible with most HALO, Spark, Tiger-i, CO-rekt and ALOHA H2O series analyzers.
ANALYZE WITH EASE™
TRACE HYDROGEN CHLORIDE ANALYZER
ANALYZE WITH EASE™
our solutions flyers
SERVICE | SALES | TRAINING
Americas +1 (215) 656-4000
EMEA +49 69 20436910
China/APAC +86 400 086 0106
Other CRDS Gas Analyzer Solutions
HALO KA™ H2O
HALO KA MAX™ H2O
HALO KA MAX™ CH4
HALO KA MAX™ NH3
HALO MAX QCL™ CO
HALO MAX QCL™ CO2
Custom CRDS Gas Analysis Solutions
GO-Cart™
HALO™ 3 CH2O
HALO™ 3 CO
HALO™ 3 CO2
HALO™ 3 D2O/HDO
HALO™ 3 H2O
HALO™ 3 CH4
HALO™ 3 HCl
HALO™ 3 NH3
HALO™ H2
HALO™ H2O in N2O
HALO™ OK
HALO™ LP H2O
HALO™ RP
HALO™ QRP
Spark™ H2O
Spark™ H2O in CO2
Spark™ CH4
Spark™ C2H2
Spark™ CO2
Spark+™ CO
Prismatic 3™
CO-REKT™
ALOHA+H2O™
T-I MAX™ HCl
T-I MAX™ HF
T-I MAX™ NH3
T-I MAX™ CEM
T-I MAX™ AIR CO2
T-I MAX™ AIR CH4
