Here are some of the industries that use the Series 2500/2510 Percent Oxygen Transmitters:

• Industrial processes: Used in various industrial processes that require precise monitoring and control of oxygen levels, such as chemical processing, food packaging, and metal processing.
• Steel Manufacturing: Used in the steel manufacturing industry for measuring oxygen levels in experiments performed under controlled or inert atmospheres in low oxygen conditions.
• Metal/Heat Treating: For certain steel alloying processes pure nitrogen atmospheres in annealing ovens are required.
• Plastics Manufacturing: Used in the plastics industry where electron beam and/or UV curing of certain plastics requires the curing to be done in a low oxygen environment. Excessive levels of oxygen adversely affect the curing and product spoilage increases.

• A factory Certificate of Performance Verification and Calibration is included at no additional charge. The product performance is verified in accordance with manufacturing specifications using a National Institute of Standards and Technology (NIST) traceable transfer calibrated standard gas mix.
• Wide Number of Ranges:  Measure from <0.1% to 100% Oxygen
• Exceptional Speed of Response:  Responds Instantaneously to Changes in Oxygen
• Rugged and Versatile Construction: Polycarbonate, rated NEMA 4X (IP66) without optional equipment.
• Economically Priced:  Save Thousands of Dollars vs Other Methods
• Patented Extended Life Sensor:  Eliminates Frequent Sensor Replacement

• Measurement Ranges: in percent 0-2, 0-5, 0-10, 0-25, 0-50, and 0-100
• Accuracy¹: ±1% of full scale (± 5% of full scale on ranges ≤ 0-5%)
• Linearity: + 1% of full scale
• Response Time: 90% of full scale in less than 20 seconds (typical)
• Sensor Type: Long-life Electrochemical Sensor
• Temperature Compensation: Standard
• Operating Temperature Range: 40° to 104°F (5° to 40°C)
• Warranty: Two years for the electronics and one year for the sensor

• Enclosure: Polycarbonate, rated NEMA 4X (IP66) without optional equipment.
• Dimensions:  5.84 in. (148.34 mm) height 4.72 in. (119.9 mm) width 3.25 in. (82.55 mm) depth.
• Gas Connections:  1/4” stainless-steel compression fittings for installations with metal sample lines.

• Series 2500 Loop Powered Trace Oxygen Transmitter Input power 14-32 VDC
• Series 2510 Trace Oxygen Transmitter: Input power 115/230 VAC, 50-60 Hz, or 24 VDC.
• Loop Resistance: 600 ohms @ 24 VDC (consult factory for other resistance values)

• Sample Flow Rate: 1.0 to 2.0 standard cubic feet per hour (SCFH) 0.5 to 1.0 liters/ minute (LPM)
• Sample Gas Pressure Limits: 0.1 to 1.5 psig (0.007 to 0.1 kg/cm2)

We Care About Safety

If you are concerned over unsafe levels of oxygen explore a complete line of oxygen deficiency monitors and accessories. We supply many instruments to medical, aerospace, and municipalities.  Occupational Safety and Health Administration (OSHA) defines an oxygen deficient environment when oxygen levels fall below 19.5 percent.  Oxygen deficient environments require accurate and reliable instrumentation. Oxygen levels below 16% is dangerous to human life.

Explore why safety monitoring matters.

RoHS-REACH-and-California-Prop-65-Compliance-Declaration