Process-Resistant NIR Flow Cell Construction
Since no metal parts come in contact with the liquid stream, the design is ideal for processes where even ppb levels of metal contamination can create serious problems, as in semiconductor fab etching and cleaning steps. The cell also performs well in the presence of extremely corrosive streams containing strong acids, bases, peroxides or halogenated compounds.
Quality is in the Design
Spectroscopic flow cell design requires stable and fixed optical path lengths, rigid optical alignment, high optical throughput, collimated (parallel) light through the sample, and smooth, turbulence free fluid flows. In addition, the flow cell materials must not contaminate the sample. The GUIDED WAVE Teflon PFA/PEEK Process Flow Cell meets all of these requirements in a simple easy to maintain design. The net result is a flow cell that offers high signal-to-noise measurements, low thermal drift, low flow noise characteristics, absorbance accuracy, and low vibration sensitivity.
Operating Range
- Temperatures to 110°C
- Pressures to 100 psi
- Four standard pathlengths 2, 5, 10 and 20 mm
- Custom paths are available by special order
Exceptional Light Transmission
The GUIDED WAVE Teflon PFA/PEEK Process Flow Cell provides exceptional optical performance. Excellent peak transmission is guaranteed to exceed 45%. This means more signal, lower measurement noise and lower detection limits. The flow cell can be completely dismantled, then reassembled without changing the sampling pathlength, an important feature when working with established NIR calibration models.
The sample interface is a crucial component of a complete fiber optic-based analyzer system. For optimal performance, the probe must be ‘’optically matched’’ with both the spectrometer and the fiber optic cable. The GUIDED WAVE Teflon PFA/PEEK Process Flow Cell , just as is the case for all Guided Wave’s probes, provides consistently high performance when used in combination with our analyzers and fiber. We have a wide variety of probe designs to meet your process needs, including the SST Probe, O-ring SST Probe, Shuttle Process Probe, High Safety Flow Cell, Multi-Purpose Flow Cell, Teflon Flow Cell, Extruder Probe, Gas Cell, and laboratory probes.
Common Integration with Most Spectrometers
The GUIDED WAVE Teflon PFA/PEEK Process Flow Cell is manufactured to facilitate full integration with any fiber optic system configured with SMA 905 connectors. The cell design provides optimal performance when used with fibers having a core diameter of 400 to 600 micron. This includes FT-NIR analyzers from other vendors.
![NIR UV VIS APPLICATION QUESTIONNAIRE]](/wp-content/themes/yootheme/cache/75/NIR-UV-VIS-APPLICATION-QUESTIONNAIRE-75d6fc6e.webp)
