The chemical industry is one of the most diverse and regulated industries. It is of central importance for the modern global economy. Chemical manufacturing transforms organic and inorganic raw materials. The chemical industry must ensure all materials, processes, and products meet standards and legislation.
Our analytical technologies and solutions will help you make better process control adjustments, increase product quality, improve reliability, and reduce risks to your plant, personnel, and the environment. Our gas and water analysis solutions for chemical processing help increase product quality, improve reliability, and reduce risks to your plant, personnel, and the environment. We offer instruments with dynamic range and low parts per billion (ppb) and parts per trillion (ppt) detection limits to meet Gas Purity and continuous atmosphere analysis needs. We know your process.
Rapid gas and liquid analyzers are able to deliver real-time control of process reactor resulting in fast, accurate process optimization for increased manufacturing yields, safer operation and reduced wear on equipment. Enhanced process safety and meeting environmental constraints and compliances keep non-compliance fees down. At the same time, satisfying product quality and specifications must be maintained.
Moisture is everywhere. For dew point control, our COSA XENTAUR™ HTF™ sensor technology can be trusted where other methods have routinely failed. The stability, accuracy and life expectancy of our HTF™ sensors have set new a standard in the industry. Dew point or moisture concentrations can have a very major effect on the quality of a process or final product. Accurate dew point measurements are often of mission-critical nature. We offer both online and spot control moisture measurement systems for gases and liquids suitable for use in hazardous areas.
Our Stack Oxygen Analyzers are well-proven with thousands of installations in chemical and power plants, refinery process heaters, blast furnaces, coke ovens, incinerators and small boiler and furnace installations worldwide. The small detector can easily be serviced or replaced while the probe remains in place, thus no disruption of the process is required. Calibrations can be performed manually or automatically at user programmable intervals. Until now, in situ measurements, used to tune boilers, were limited to O2 only. Now, there is a compact in-situ probe for combustion optimization to measure both COe and O2 simultaneously providing engineers an improved tool to lower excess air to previously unachieved levels, saving fuel costs. Our COSA O2CX In Situ Combustion Optimization Monitor is for Flue Gas Oxygen and Combustibles.
New regulations on flare emissions require oil refineries and chemical plants to analyze the vent gas and quickly make appropriate adjustments as mandated. You need a complete analysis for compliance with regulations such as EMACT, MONMACT, RSR, Subpart Ja, Ontario Reg. 530/18, Korean Facility Management Standards to Reduce Fugitive Emissions, and HRVOC rules. Chemical manufacturers need fast, reliable monitoring. Real-time gas analyzers provide the speed and reliability needed for flare compliance, control, and monitoring of H2S, Total Sulfur, Net Heating Value (NHV)/BTU, H2, and full speciated composition.
Copyright © 2022 Process Insights, Inc. All Rights Reserved.